TELTONIKA RUTX10 Industrial Ethernet WiFi Router
Write a review below |
5/5
In stock
Condition: New
Delivery: Free Next Day*
$141.00 Ex VAT
In stock
TELTONIKA RUTX10 Industrial Ethernet WiFi Router
Write a review below |
5/5
Condition: New
Delivery: Free Next Day
In stock
$141.00 Ex VAT
(QTY Discount Available)*
Brands:
In stock
TELTONIKA RUTX10 Industrial Ethernet WiFi Router
Specification
| Ethernet | ||
|---|---|---|
| WAN | 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover | |
| LAN | 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover | |
| Wireless | ||
| Wireless Mode | 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) | |
| WiFi Security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation | |
| ESSID | ESSID stealth mode | |
| Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page | |
| Bluetooth | ||
| Bluetooth 4.0 | Bluetooth low energy (LE) for short range communication | |
| Network | ||
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2 EIGRP, NHRP) | |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL), DLNA | |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets | |
| Connection monitoring | Ping Reboot, Wget reboot, periodic reboot, LCP and ICMP for link inspection | |
| Firewall | Port forwards, traffic rules, custom rules | |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd | |
| QoS/Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port | |
| DDNS | More than 25 service providers are supported, others can be configured manually | |
| Network backup | VRRP | |
| Hotspot | Internal/external Radius server, captive portal, built-in custom landing page | |
| SSHFS | Possibility to mount remote file system via SSH protocol | |
| Security | ||
| Authentication | Pre-shared key, digital certificates, X.509 certificates | |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T | |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) | |
| VLAN | Port and tag based VLAN separation | |
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only | |
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter | |
| VPN | ||
| OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods | |
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC | |
| IPsec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) | |
| GRE | GRE Tunnel | |
| PPTP, L2TP | Cleint/Server instances can run simultaneously, L2TPv3 support | |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code | |
| DMVPN | Method of building scalable IPsec VPNs | |
| SSTP | SSTP client instance support | |
| ZeroTier | ZeroTier VPN client support | |
| WireGuard | WireGuard VPN client and server support | |
| MODBUS | ||
| MODBUS TCP Slave | ||
| ID filtering | Respond to one ID in range [1;255] or any | |
| Allow remote access | Allow access through WAN | |
| Custom registers | MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality | |
| MODBUS TCP Master | ||
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 | |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII | |
| MQTT Gateway | ||
| Gateway | Allows sending command and receiving data from MODBUS Master through MQTT broker | |
| DNP3 | ||
| Support modes | TCP Master, DNP3 Outstation | |
| Data to Server | ||
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis | |
| Monitoring and Management | ||
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log | |
| FOTA | Firmware update from server, automatic notification | |
| SSH | SSH (v1, v2) | |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly teach, AVSystem | |
| MQTT | MQTT Broker, MQTT publisher | |
| SNMP | SNMP (v1, v2, v3), SNMP trap | |
| JSON-RPC | Management API over HTTP/HTTPS | |
| MODBUS | MODBUS TCP status/control | |
| RMS | Teltonika Remote Management System (RMS) | |
| System Characteristics | ||
| CPI | Quad-core ARM Cortex A7, 717MHz | |
| RAM | 256 MB, DDR3 | |
| FLASH storage | 256 MB, SPI Flash | |
| Firmware/Configuration | ||
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup | |
| FOTA | Update FW/configuration from server | |
| RMS | Update FW/configurations for multiple devices at once | |
| Keep settings | Update FW without losing current configuration | |
| Firmware Customisation | ||
| Operating system | RutOS (OpenWrt base Linux OS) | |
| Supported languages | Busybox shell, Lua, C, C++ | |
| Development tools | SDK package with build environment provided | |
| USB | ||
| Data rate | USB 2.0 | |
| Applications | Samba share, USB-to-serial | |
| External devices | Possibility to connect external HDD, flash drive, additional modem, printer | |
| Storage formats | FAT, FAT32, NTFS | |
| Input/Output | ||
| Input | 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high | |
| Output | 1 x Digital Output, Open collector output, max output 30 V, 300 mA | |
| Events | Email, RMS | |
| I/O Juggler | Allows to set certain I/O conditions to initiate event | |
| Power | ||
| Connector | 4 pin industrial DC power socket | |
| Input voltage range | 9 – 50VDC, reverse polarity protection, voltage surge/transient protection | |
| PoE(passive) | Passive PoE via LAN port, not compatible with IEEE 802.3af, 802.3at, and 802.3bt standards | |
| Power consumption | 6W Max | |
| Physical Interfaces (Ports, LEDs, Buttons) | ||
| Ethernet | 4 x RJ45 ports, 10/100/1000 Mbps | |
| I/Os | 1 x Digital Input, 1 x Digital Output on 4 pin power connector | |
| Status LEDs | 8 x LAN status LEDs, 1 x Power LED | |
| Power | 1 x 4 pin DC connector | |
| USB | 1 x USB A port for external devices | |
| Reset | Reboot/User default reset/Factory reset button | |
| Other | 1 x Grounding screw | |
| Physical Specification | ||
| Casing Material | Aluminium housing with DIN rail mounting option | |
| Dimensions(W x H x D) | 115 x 32.2 x 95.2 mm | |
| Weight | 345 g | |
| Mounting options | DIN rail, flat surface placement | |
| Operating Environment | ||
| Operating Temperature | -40°C to 75°C | |
| Operating Humidity | 10% to 90% non-condensing | |
| Ingress Protection Rating | IP30 | |
| Regulatory and Type Approvals | ||
| Regulatory and Type Approvals | CE, RoHS, REACH | |
| EMI Immunity | ||
| Standards | EN 55032:2015, EN 55035:2017 | |
| ESD | EN 61000-4-2:2009 | |
| RS | EN 61000-4-3:2006+A1:2008+A2:2010 | |
| EFT | EN 61000-4-4:2012 | |
| Surge Protection | EN 61000-4-5:2014 | |
| CS | EN 61000-4-6:2014 | |
| DIP | EN 61000-4-11:2004 | |
| Safety | ||
| Standards | IEC 62368-1:2014 EN 62368-1:2014+A11:2017 | |
Reviews
There are no reviews yet.