Mobile

Mobile module

• 4G (LTE) – Cat 4 up to 150 Mbps
• 3G – Up to 42 Mbps
• 2G – Up to 236.8 kbps

SIM switch

• 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status

• Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

Bridge

• Direct connection (bridge) between mobile ISP and device on LAN

Passthrough

• Router assigns its mobile WAN IP address to another device on LAN

APN

• Auto APN

SMS

• SMS status
• SMS configuration
• Send/read SMS via HTTP POST/GET
• EMAIL to SMS
• SMS to EMAIL
• SMS to HTTP
• SMS to SMS
• Scheduled SMS
• SMS autoreply
• SMPP

Black/White list

• Operator black/white list

Multiple PDN

• Possibility to use different PDNs for multiple network access and services

Band management

• Band lock, Used band status display

Wireless

Wireless mode

• IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi security

• WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

SSID

• SSID stealth mode and access control based on MAC address

WiFi users

• Up to 100 simultaneous connections

Hotspot

• Captive portal (Hotspot), internal/external Radius server, built in customisable landing page

Ethernet

WAN

• 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN

• 3 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

Routing

• Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

Network protocols

• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support

• H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

• Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

• Port forward, traffic rules, custom rules

DHCP

• Static and dynamic IP allocation, DHCP Relay, Relayd

QoS

• Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

• Supported >25 service providers, others can be configured manually

Network backup

• VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Load balancing

• Balance your internet traffic over multiple WAN connections

SSHFS (optional)

• Possibility to mount remote file system via SSH protocol (not available in standard FW)

Security

Authentication

• Pre-shared key, digital certificates, X.509 certificates

Firewall

• Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

• DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

• Port and tag based VLAN separation

Mobile quota control

• Set up custom data limits for the SIM card

WEB filter

• Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control

• Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

• Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption

• DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

• IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

• GRE tunnel

PPTP, L2TP

• Client/Server services can run simultaneously

Stunnel

• Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code

DMVPN

• Method of building scalable IPsec VPNs

SSTP

• SSTP client instance support

ZeroTier

• ZeroTier VPN

WireGuard

• WireGuard VPN client and server support

MODBUS TCP Slave

ID filtering

• Respond to one ID in range [1;255] or any

Allow Remote Access

• Allow access through WAN

Custom registers

• MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP Master

Supported functions

• 01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

• 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS data to server

Protocol

• HTTP(S), MQTT, Azure MQTT

MQTT Gateway

MQTT gateway

• Allows sending commands and receiving data from Modbus Master through MQTT broker

DNP3

Supported modes

• TCP Master, DNP3 Outstation

Monitoring & Management

WEB UI

• HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log

FOTA

• Firmware update from sever, automatic notification

SSH

• SSH (v1, v2)

SMS

• SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call

• Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off

TR-069

• OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

• MQTT Broker, MQTT publisher

SNMP

• SNMP (v1, v2, v3), SNMP trap

JSON-RPC

• Management API over HTTP/HTTPS

MODBUS

• MODBUS TCP status/control

RMS

• Teltonika Remote Management System (RMS)

IoT platforms

Cloud of things

• Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

• Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity

• Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub

• Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

System Characteristics

CPU

• Mediatek, MT7628, 580 MHz

RAM

• 128 MB, DDR2

FLASH storage

• 16 MB, SPI Flash

Firmware / Configuration

WEB UI

• Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA

• Update FW/configuration from server

RMS

• Update FW/configuration for multiple devices

Keep settings

• Update FW without losing current configuration

Firmware Customisation

Operating system

• RutOS (OpenWrt based Linux OS)

Supported languages

• Busybox shell, Lua, C, C++

Development tools

• SDK package with built environment provided

Input / Output

Input

• 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high

Output

• 1 x Digital open collector output, max output 30 V, 300 mA

Events

• SMS, EMAIL, RMS

Power

Connector

• 4 pin industrial DC power socket

Input voltage range

• 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max

PoE (passive)

• Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards

Power consumption

• < 2 W Idle
• < 7 W Max

Physical Interfaces (Ports, LEDs, Antennas, Buttons, SIM)

Ethernet

• 4 x RJ45 ports, 10/100 Mbps

I/O’s

• 1 x Digital Input, 1 x Digital Output on 4 pin power connector

Status LEDs

• 1 x Bi-colour connection status LED
• 5 x Connection strength LEDs
• 4 x LAN status LEDs
• 1 x Power LED

SIM

• 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder, eSIM (optional)

Power

• 4 pin DC connector

Antennas

• 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors

Reset

• Reset/restore to default button

Physical Specification

Casing material

• Aluminium housing, plastic panels

Dimensions (W x H x D)

• 110 mm x 50 mm x 100 mm

Weight

• 287 g

Mounting options

• DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

Operating temperature

• -40ºC to 75ºC

Operating humidity

• 10% to 90% non-condensing

Ingress Protection Rating

• IP30

Regulatory & Type Approvals

Regulatory

• CE/RED, UKCA, CB

EMI Immunity

Standards

• EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 Final draft EN 301 489-52 V1.2.0 EN 55032:2015+A1:2020 EN 55035:2017+A11:2020 EN 61000-3-3:2013+A1:2019 EN IEC 61000-3-2:2019

ESD

• EN 61000-4-2:2009

RS

• EN 61000-4-3:2020

EFT

• EN 61000-4-4:2012

Surge immunity (AC Power Line)

• EN 61000-4-5:2014+A1:2017

DIP

• EN IEC 61000-4-11:2020

RF

Standards

• EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1

Safety

Standards

• EN IEC 62311:2020 IEC 62368-1:2018 EN IEC 62368-1:2020+A11:2020

Package Contents

• 1 x RUT951 router
• 1 x 9W UK Power Supply
• 2 x LTE antennas (swivel, SMA male)
• 2 x WiFi antenna (swivel, RP-SMA male)
• 1 x Ethernet cable (1.5 m)
• 1 x SIM Adapter kit
• 1 x RMS Flyer
• 1 x QSG (Quick Start Guide)